Guangzhou Jusbe Electronic Technology Co., Ltd.

32-ch audio mixer
MD32/14FX
  • 32 input channels; 24 microphone + 4 stereo line input; l4 bus (stereo, 4 groups, 6 auxiliary, 2 effects);

DESCRIPTION

1, 32 input channels; 24 microphone + 4 stereo line input; l4 bus (stereo, 4 groups, 6 auxiliary, 2 effects);

2. Low noise, high precision microphone preamplifier;

3. Phantom power switch and plug-in input/output;

4, 3 channel equalization (central frequency sweep) and HPF;

5. Indicator light ON/OFF switch;

6, dual SPX digital effects;

7. A single channel output scanable LPF;

8, intercom input.

PARAMETERS

1. Frequency characteristics: 20 Hz-20 kHz +1 dB, -3 dB @+4 dB, 600 Ω;

2, total harmonic distortion: 0.1% (THD + N) @ +14 dBu, 20 Hz-20 kHz, 600 Ω;

3. Noise: (20 Hz-20 kHz);

4. Input gain = maximum;

5, input attenuation = OFF;

6. Input sensitivity = -60 dB-128 dB;

7. Equivalent input noise: -99 dB;

8. Residual output noise (ST, MONO OUT, AUX, EFFECT, GROUP OUT) - 83 dB (87 dB S/N) ST, MONO, GROUP at nominal level;

9. Main attenuator; all channel transmit switches are set to off. -78 dB (82 dB S/N) AUX at nominal level;

   Master control; all channel mixing control at minimum level; -64 dB (68 dB S/N); ST, GROUP main attenuator and a channel attenuator at nominal level; (channels 1 to 24);

10. Mono/stereo input gain control is 44 dB variable;

11, single high pass filter 80 Hz 12 dB / octave; channel input attenuator 0 dB / 26 dB;

12. Crosstalk (1 kHz): -70 dB between input channels; -70 dB between input/output channels (CH INPUT);

13. Mono input channel equalization; maximum variation range: 3±15 dB HIGH (high) 10 kHz gradient; MID (medium) 0.25-5 kHz peaking; LOW (low) 100 Hz gradient;

14. Stereo input channel equalization; maximum variation range: 3±15 dB HIGH (high) 10 kHz gradient; HI-MID (high-medium) 3 kHz peaking; LO-MID (low-medium) 800 Hz peaking; LOW (low) 100 Hz gradient;

15. Internal digital effect: Effect 1: 16 programs, parameter control; effect 2: 16 programs, parameter control; TAP DELAY control, foot switch (TAP);

16, mono low pass filter 80 - 120 Hz 12 dB / octave;

17. Mono/stereo input peak indicator A red indicator light for each channel;

18. Lights up when the post-equalization signal level reaches +17 dB;

19. Mono/stereo input signal indicator A green indicator light for each channel;

20. Lights up when the post-equalization signal level reaches -10 dB;

21, level meter: four 12-point LED indicator [stereo (L, R), PFL / AFL, GROUP (1 - 4)];

22, power supply: DC +48 V, voltage: 230 V;

23, power consumption: 50 W;

Body size (L × W × H): 1027 * 551 * 140 (unit: mm);

Net weight: 22 kg.